Roll-Out Drive Units; Ul Certification; Documentation - Allen-Bradley 1336 PLUS Selection Manual

UL Certification

Documentation

Roll-Out Drive Units

The basic standard roll-out drive unit includes:
• the selected drive, mounted and wired on a roll-out chassis assembly
• a fused-disconnect switch with an operator mechanism and appropriate
fuses
• bus-to-disconnect wiring
• output common-mode chokes in all D, E, and F-frame units and in
G-frame 2362H units (common DC bus 1336 FORCE)
• a vented door with fan(s), if appropriate
Note: All D and E-frame units and common DC bus F-frame units are
mounted in 20" deep vertical sections. Common AC bus F-frame
units and all G-frame units are mounted in 20" + 5" (bumpback)
deep vertical sections for ease of serviceability.
Bulletin 2100 CENTERLINE® Motor Control Centers are certified by
Underwriters Laboratories, Inc. (UL), Standard UL 845. The 2362 family of
AC drive units are UL/cUL listed. All vertical sections and units certified by
UL will carry the label. Vertical sections and units are labeled separately.
The customer is supplied with copies of the following:
• the unit wiring diagram and installation instructions
• publications
– Bulletin 2300 Drive Systems Installation Manual (2300-5.1)
– the appropriate AC drive user manual
– Receiving, Handling, and Storing Motor Control Centers (2100-5.5)
For additional documentation, consult your Rockwell Automation Sales
Office.
Introduction p-3