Cisco ASR 920 Series Routers Features
Table 1-3
Specification
TDM Support
Mounting option
Port Configuration
Port Numbering
Combo Ports
LEDs
Temperature Sensors
Timing Interfaces
External Interfaces
The Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router have these external
physical interfaces on the front panel:
Network Interfaces
The network interfaces are provided through fixed ports.
•
•
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
1-10
Cisco ASR 920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Router Specifications
ASR-920-24SZ-IM
Supported through IM card
Front or rear rail 19 inches or
•
23 inches
ETSI 300 mm cabinet
•
Wall Mount (with only side
•
mount option).
Note
24x1G and 4x10G ports and IM
card ports
24x1G SFP – Port [0:23]
4x10G SFP+ – Port [24:27]
No combo ports
Data Port LEDs
System Status LED
Management Port LED
PSU LED
Fan Tray LED
Five temperature sensors for
Board
Two temperature sensors for each
PSU
External ports for BITS/ToD
SMA ports for 1 PPS and 10 M
1588v2 and SyncE feature
supported
GE SFP ports (fiber)—supports 100/1000 modes (ASR 920-24SZ-IM and ASR-920-24SZ-M)
GE SFP ports (copper)—supports 10/100/1000 operation (ASR-920-24TZ-M)
For more information,
see
Wall Mounting the
Routers, page
3-15.
Chapter 1
ASR-920-24SZ-M, ASR-920-24TZ-M
None
Front or rear rail 19 inches or 23
•
inches
ETSI 300 mm cabinet
•
Wall Mount (with only side mount
•
option)
For more information, see
Note
Mounting the Routers,
page
3-15.
24x1G and 4x10G ports
24x1G SFP (Fiber) – Port [0:23]
(ASR-920-24SZ-M)
24x1G SFP (Copper) – Port [0:23]
(ASR-920-24TZ-M)
4x10G SFP+ – Port [24:27]
No combo ports
System Status LED
Management Port LED
PSU LED
Fan Tray LED
Five temperature sensors for Board
Two temperature sensors for each PSU
No external timing ports
1588v2 and SyncE feature supported
Overview
Wall