Power Connection Guidelines - Cisco ASR-920-24SZ-IM Installation Manual

Installing the Chassis Ground Connection
Figure 3-35
Step 2 Slide the open end of your 2-hole ground lug over the exposed area of the ground wire.
Step 3 Using a crimping tool (as specified by the ground lug manufacturer), crimp the ground lug to the ground wire
as shown in
Figure 3-36
Step 4 Use a Phillips head screwdriver to attach the 2-hole ground lug and wire assembly to the router with the
2 pan-head Phillips head screws.
Step 5 Connect the other end of the ground wire to a suitable grounding point at your site.

Power Connection Guidelines

This section provides guidelines for connecting the Cisco ASR 920 Series Aggregation Services Router
power supplies to the site power source.
•
•
•
This equipment is intended to be grounded to comply with emission and immunity requirements.
Warning
Ensure that the switch functional ground lug is connected to earth ground during normal use.
Statement 1064
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
3-46
Stripping a Ground Wire
0.5 in. (12.7 mm) ± 0.02 in. (0.5 mm)
Insulation
Figure 3-36.
Crimping a Ground Lug on to the Ground Wire
Preventing Power Loss, page 3-47
Activating a DC Power Supply, page 3-48
Activating an AC Power Supply, page 3-48
Wire lead
Chapter 3 Installing