External Interfaces; Usb Interface - Cisco 880 Series Hardware Installation Manual

Chapter 1 Product Overview

External Interfaces

Figure 1-6
Figure 1-6 Back I/O Panel
VDSL/ADSL
WAN
OVER POTS GE2
Table 1-4
Table 1-4 External Interfaces
Interface
FE LAN port
GE LAN port
GE WAN port (10/100/1000 Base-T)
ADSL2+/VDSL2 WAN port
Host USB port
Console port
1. Provides Power-over-Ethernet (PoE) for the Cisco C867VAE-POE-W-A-K9.
For the Cisco C867VAE-POE-W-A-K9, Power-over-Ethernet (PoE) is available using port FE0, with a
Note
60-W power supply.

USB Interface

The USB 2.0 interface enables:
•
•
Use only the following Cisco USB 2.0 flash tokens:
•
•
•
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-12
shows the back I/O panel of the Cisco 867VAE-POE-W-A-K9 series router.
Cisco 867VAE-POE-W-A-K9
LAN
GE1 GE0 FE2 FE1
describes the external interfaces included with these router models.
Transferring data using a USB flash token (USB memory stick) for system recovery and other tasks.
Cisco IOS software boot from USB.
MEMUSB-128FT (128 MB)
MEMUSB-256FT (256 MB)
MEMUSB-1024FT (1 GB)
Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and Cisco 860VAE-POE-W-A-K9 ISRs
CONSOLE
12V
FE0(POE) AUX
Connector
RJ-45
RJ-45
RJ-45
RJ-11
USB 2.0
RJ-45
2.5A
RESET
Quantity Port
3 FE LAN PORT 0
FE LAN PORT 1
FE LAN PORT 2
2 GE LAN PORT 0
GE LAN PORT 1
1 GE WAN PORT
1 —
1 —
1 —
Port
Label
1
FE0
FE1
FE2
GE0
GE1
GE2
—
—
—
1-7