Rj-45 Leds - Cisco ASR-920-24SZ-IM Installation Manual

Cisco ASR 920 Series Routers Features
Table 1-9
LED
Power
(PWR)
Operating Status
(STAT)

RJ-45 LEDs

Each RJ-45 port has two LED indicators. Left LED indicates the Link status; right LED indicates the
status of the duplex LED.
Table 1-10
LED
Left
Right
Power Supply Unit LEDs
Each power supply unit has a corresponding LED on the front panel.
Table 1-11
LED
OK
Cisco ASR-920-24SZ-IM, ASR-920-24SZ-M, ASR-920-24TZ-M Aggregation Services Router Hardware Installation Guide
1-16
8 x T1/E1 Interface Module LEDs
LED State
Green
Red
Off
Red
Off
Blinking red
Green
RJ-45 LED Indication
LED State
Green
Blinking Green
Yellow
Off
Green
Off
PSU LED Indication
LED State
Green
Red
Indication
All power rails are within supported range
Disabled
No power to the Interface Module
Failed
Disabled or powered-down
Booting
Active
Indication
Link up in 10/100/1000Base-T
Activity in 10/100/1000Base-T
Fault/Error
Link down
Link up in full duplex
Link up in half duplex
Indication
Power Supply is working and 12V output is alright.
12V output failure (Either input not present or fault
in the power supply unit).
Chapter 1 Overview