Standard Installation; Installing The Operator - CAME AX5024 Installation Manual

5.4 Standard installation

1) AXO operator
2) Control panel
3) Reception antenna
4) Flashing light
5) Selector switch
6) Photocells
7) Electric cable junction box
8) Mechanical gate stops
9) Photocell column
2

5.5 Installing the operator

The following illustrations are only examples, given that the space available for anchoring the operator and accessories may vary
from gate to gate. It is up to the installer, thus, to choose the most suitable solution.
Lay the corrugated tubing needed for the connections deriving from the junction box.
N.B. the number of tubes depends on the type of system and accessories employed.
6
4
3
5
7
1
6
8
9
Electric cable junction box
6
8
1
6
9