CAME AX5024 Installation Manual page 9

Open the gate leaf and insert the pin into the gate bracket and secure it using a washer and nut.
Release the gearmotor (see paragraph on manual release), completely open the gate leaf, loosen the nuts of the opening mechanical
stop and position it up against the attachment pin, then secure it.
Close the gate leaf, loosen the nuts on the closing mechanical stop, place it up against the attachment pin, then secure it.
Gate bracket
Opening
mechanical stop
Attachment pin
Closing mechanical stop
UNI6593 Ø8 washer
Attachment pin
Screw UNI5739 M8x10