CAME AX5024 Installation Manual page 7

Warning: after establishing the best point to which you will secure the gate bracket, secure the bracket to the pillar and make sure the
quotas shown in the table below are met.
Note: by increasing measure B, the opening angle and gate speed are reduced, while the gearmotor thrust is increased. By increasing
the measure A, the opening angle and gate speed are increases, while the gearmotor thrust is decreased.
Pillar bracket
AX3024
Gate leaves of up to 3m
Opening A
angle mm mm
90° 130 130
120° 150
120° 140 100
Assemble and weld the two parts of the pillar bracket. Secure the bracket to the point you have chosen with proper plugs and screws
or - if the pillar is made of metal - weld it on.
AX3024
AX5024
Gate bracket
E
B C max E
mm mm
70 800
80 0 800
50 800
AX5024
Gate leaves of up to 5 m
Opening A B
angle mm mm
90° 200 220
120° 220 220
1
2
1
2
C max E
mm mm
150 1100
100 1100