Connecting The Bs80 To Smartphone/Tablet - Newland NLS-BS80 User Manual

Connecting the BS80 to Smartphone/Tablet

1. Make sure your device has HID or SPP or BLE profile.
2. If the red Function LED on the scanner is on, hold down the Scan/Power button and Function button at
the same time for 3 seconds or scan the Bluetooth Mode barcode to switch to the Bluetooth mode.
Hold down the Delete/Reset button and Function button at the same time or scan the Delete Bluetooth
Pairing barcode to remove existing pairing information from the scanner.
Bluetooth Mode
3. Turn off the Power-Saving mode on your smartphone/tablet.
4. Scan the appropriate barcode below to choose HID or SPP or BLE profile before connecting the
scanner to smartphone/tablet. If you don't know what profile your device is using, please try HID profile
first, then SPP, at last BLE profile.
HID (default)
5. Complete the following connection procedure (example: pairing with iPhone).
7
BLE
Delete Bluetooth Pairing
SPP