Upgrade The Firmware - Newland NLS-BS80 User Manual

Upgrade the Firmware

Step 1: Contact the technical support to get the BS80 Firmware Upgrade Utility and the latest firmware.
Step 2: Download CDC-Virtual COM Driver from the Newland website at www.newlandaidc.com. Install it
on PC by following the on-screen instructions. (Skip this step if it is already installed on your PC.) Make
sure that the driver is properly installed. You cannot upgrade the firmware without it.
Step 3: Turn on the scanner. Hold down the Function button and the Delete/Reset button on the scanner
at the same time until the green Good Read LED lights up.
Step 4: Run the BS80Update program. Then click "Start".
Step 5: Connect the scanner to your PC with the USB cable. Then the update begins. The red and blue
Function LEDs flash alternately during the updating process.
37