Connecting The Piranha To Smartphone/Tablet - Newland BS8050-3V Piranha User Manual

Connecting the BS80 to Smartphone/Tablet
1. Make sure your device has HID or SPP profile.
2. Turn off the Power-Saving mode of your smartphone/tablet first. If the red Function LED on the scanner
illuminates, hold down the Scan/Power button and Function button at the same time for 3 seconds or
scan the barcode below to switch to the Wireless mode.
3. Scan the appropriate barcode below to choose HID or SPP profile before connecting to
smartphone/tablet. If you don't know what profile your device is, please try HID profile first, then SPP
profile.
HID (Default)
4. Complete the following connection procedure (example: pairing with iPhone). If the Piranha does not
appear in the search results in step (5), you might need to delete existing pairing information on the
scanner by holding down the Function button on the scanner for 5 seconds (see Functions of the
Buttons in this chapter) or by scanning the Delete Bluetooth Pairing barcode (see Delete
Bluetooth Pairing in Chapter 2).
Wireless Mode (Default)
SPP
6