Vibration Notifications - Newland NLS-BS80 User Manual

Vibration Notifications

Turn vibration notifications on or off by scanning the appropriate barcode below. After this feature is
enabled, the scanner vibrates when one of the following events occurs:
1. A barcode is decoded (including good read for removing barcode data from the flash memory).
2. The scanner switched to the Bluetooth mode or USB mode.
3. iOS soft keyboard is turned on or off.
4. The paired Bluetooth device is unpaired from the scanner.
5. Batch data transmission via Bluetooth or USB starts.
6. The scanner is turned off.
Vibration Notifications On
19
Vibration Notifications Off (default)