Sound-Active Mode; Auto Mode; Built-In Programs - Elumen8 ELUM085 User Manual

Operating instructions
Sound active mode:
To select the sound active mode, press the "MODE" button to show "SOUND MODE" on the LCD display.
Now press the "ENTER" button and use the "UP" and "DOWN" buttons to adjust the sound
sensitivity level (SENS00-31) and press the "ENTER" button again to adjust the frequency level
(FQN01-99). Press the "ENTER" button to confirm your setting.
To exit out of any of the above options, press the "MODE" button.

Auto mode:

To select the Auto run mode, press the "MODE" button to show "AUTO RUN" on the LCD display.
Now press the "ENTER" button to adjust the frequency level (FQN01-99).
Press the "ENTER" button to confirm your setting.
The unit will now run all 14 built-in programmes one after another.
To exit out of any of the above options, press the "MODE" button.
Slave mode:
To select slave mode, first link the units together via 3-Pin or 5-Pin XLR cable(s), press the "MODE"
button to show "SLAVE MODE" on all of the slave units. Now the slave units will follow in conjunction with
the master unit. Press the "ENTER" button to confirm your setting.
To exit out of any of the above options, press the "MODE" button.

Built-in programs:

To access the built-in program, press the "MODE" button to show "01.STATIC" on the LCD display.
Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose one of the
14 built-in programs (01-14) (see table overleaf).
To choose one of the seven colours in the "STATIC" mode, press the press the "ENTER" button and use
the "UP" and "DOWN" buttons to choose one of the following 15 colours.
To adjust the speed level in the remaining 13 built-in programs, press the "ENTER" button and use
the "UP" and "DOWN" buttons to set the desired speed level (00-99). To adjust the flash speed press
the "ENTER" button and use the "UP" and "DOWN" buttons to set the desired flash speed level (00-99).
Press the "ENTER" button to confirm your setting.
To exit out of any of the above options, press the "MODE" button.
NOTE: The frequency level (FQN01-99) adjusts how many times the program repeats before moving to the next program.
www.prolight.co.uk Matrix Tri Pixel Panel 25 MKII User Manual
11