GE UR Series L90 Instruction Manual page 542

8.2 CYBERSENTRY
For the Device > Settings > Product Setup > Supervisory option, the panel looks like the following.
For the Security panel, the following settings are available.
RADIUS Server Settings
SETTING NAME DESCRIPTION
Primary RADIUS IP IP address of the main RADIUS server.
Address Default value indicates no Primary
RADIUS server is configured, and hence
RADIUS is disabled.
Primary RADIUS authentication port
Authentication Port
Primary Accounting RADIUS accounting port
Port
Vendor ID An identifier that specifies RADIUS
8
vendor-specific attributes used with the
protocol
RADIUS Shared secret used in authentication. It
Authentication displays as asterisks. This setting must
(Shared) Secret meet the CyberSentry password
requirements.
RADIUS Authentication method used by RADIUS
Authentication server. Currently fixed to EAP-TTLS.
Method
Timeout Timeout in seconds between re-
transmission requests
Retries Number of retries before giving up
8-6
Figure 8–3: SUPERVISORY PANEL
MIN
0.0.0.0
1
1
See the
following
password
section for
requirements
EAP-TTLS
0
0
L90 Line Current Differential System
MAX DEFAULT
223.255.255.254 0.0.0.0
65535 1812
65535 1813
Value that
represents
General
Electric
See the following N/A
password section
for requirements
EAP-TTLS EAP-TTLS
9999 10
9999 3
8 SECURITY
UNITS MINIMUM
PERMISSION
- Administrator
- Administrator
- Administrator
Administrator
- Administrator
- Administrator
sec Administrator
- Administrator
GE Multilin