Remote Double-Point Status Inputs; Direct Inputs; Contact Outputs - GE UR Series L90 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES STATUS
 REMOTE DPS INPUTS

MESSAGE
MESSAGE
The present state of the remote double-point status inputs is shown here. The actual values indicate if the remote double-
point status inputs are in the on (close), off (open), intermediate, or bad state.

PATH: ACTUAL VALUES STATUS
 DIRECT INPUTS

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The present state of the direct inputs from communications channels 1 and 2 are shown here. The state displayed will be
that of the remote point unless channel 1 or 2 has been declared to have "failed", in which case the value shown is the pro-
grammed default state defined in the

PATH: ACTUAL VALUES STATUS
 CONTACT OUTPUTS

MESSAGE
MESSAGE
GE Multilin

REMOTE DPS INPUTS
REMOTE DPS INPUT
STATUS: Bad
REMOTE DPS INPUT
STATUS: Bad

REMOTE DPS INPUT
STATUS: Bad


DIRECT INPUTS

DIRECT INPUT 1-1:
Off
DIRECT INPUT 1-2:
Off

DIRECT INPUT 1-8:
Off
DIRECT INPUT 2-1:
Off
DIRECT INPUT 2-2:
Off

DIRECT INPUT 2-8:
Off

SETTINGS INPUTS/OUTPUTS


CONTACT OUTPUTS

Cont Op 1
Off
Cont Op 2
Off

Cont Op xx
Off
L90 Line Current Differential System

6.2.4 REMOTE DOUBLE-POINT STATUS INPUTS

Range: On, Off, Intermediate, Bad
1
Range: On, Off, Intermediate, Bad
2
Range: On, Off, Intermediate, Bad
5
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
 
DIRECT DIRECT INPUTS
6.2.6 CONTACT OUTPUTS
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
Range: On, Off, VOff, VOn, IOn, IOff
6.2 STATUS
6.2.5 DIRECT INPUTS
6
menu.
6-5