Xtreme Power Conversion 1000VA User & Installation Manual page 24

T91 User's Manual
19: Acceptable input voltage range setting
Interface
00: Exit setting
Interface
Xtreme Power Conversion Corporation
Settings
Parameter 2: Set the acceptable high voltage point and acceptable low
voltage point for input voltage range by
pressing the Down key or Up key.
HLS: Input high voltage point
For 200/208/220/230/240 VAC models:
280/290/300: setting the high voltage point in parameter
2. (Default: 300Vac)
For 100/110/115/120/127 VAC models:
140/145/150: setting the high voltage point in parameter
2. (Default: 150Vac)
LLS: Bypass low voltage point
For 200/208/220/230/240 VAC models:
110/120/130/140/150/160: setting the low voltage point in parameter
2. (Default: 110Vac)
For 100/110/115/120/127 VAC models:
55/60/65/70/75/80: setting the low voltage point in
parameter 2. (Default: 55Vac)
Settings
Exit the setting mode.
Uninterruptible Power Supply
Page 24