Phone Lock - Yealink CP969 Administrator's Manual

Administrator's Guide for SIP-T5 Series Smart Media Phones
None
To configure the auto-logout time via web user interface:
Click on Features->General Information.
1.
Enter the desired auto-logout time in Auto-Logout Time(1~1000min) field.
2.
Click Confirm to accept the change.
3.

Phone Lock

Phone lock is used to lock the IP phone to prevent it from unauthorized use. Once the IP phone
is locked, the user must enter the password to unlock it. The IP phone will not be locked
immediately after the phone lock feature is enabled. One of the following steps is also needed:
- Long press the pound key when the IP phone is idle (not applicable to CP960 IP phones).
Press the phone lock key (if configured) when the IP phone is idle.
-
In addition to the above steps, you can configure the IP phone to automatically lock the phone
after a period of time.
692
Parameter Permitted Values Default