Voice Mail Tone - Yealink CP969 Administrator's Manual

To configure tones via web user interface:
Click on Settings->Tones.
1.
Select the desired value from the pull-down list of Select Country.
2.
If you select Custom, you can customize a tone for each condition of the IP phone.
Click Confirm to accept the change.
3.

Voice Mail Tone

Voice mail tone feature allows the IP phone to play a warning tone when receiving a new voice
mail. You can customize the warning tone or select specialized tone sets (vary from country to
country) for your IP phone. For more information, refer to
Procedure
Voice mail tone can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
<y0000000000xx>.cfg
Configuring Audio Features
Tones on page 614.
Configure whether to play a warning
tone when the IP phone receives a new
voice mail.
Parameter:
features.voice_mail_tone_enable
Configure whether to play a warning
tone when the IP phone receives a new
voice mail.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=features-general&q=load
621