Call Transfer - Yealink CP969 Administrator's Manual

You can also enable no answer forward for all accounts. Do the following:
Tap
1)
The touch screen prompts "Copy to all lines?".
Tap OK to accept the change or Cancel to cancel.
2)
Tap , and then tap Save to accept the change.
5.
To configure forward international via phone user interface:
Tap Settings->Advanced (default password: admin) ->FWD International.
1.
Tap the FWD International field.
2.
Tap the desired value in the pop-up dialog box.
3.
Tap to accept the change.
4.

Call Transfer

Call transfer enables IP phones to transfer an existing call to a third party. For example, if party A
is in an active call with party B, party A can transfer this call to party C (the third party). Then,
party B will begin a new call with party C and party A will disconnect.
IP phones support call transfer using the REFER method specified in
types of transfer:
Blind Transfer -- Transfer a call directly to another party without consulting. Blind transfer

is implemented by a simple REFER method without Replaces in the Refer-To header.
Semi-attended Transfer -- Transfer a call after hearing the ringback tone. Semi-attended

transfer is implemented by a REFER method with Replaces in the Refer-To header.
Attended Transfer -- Transfer a call with prior consulting. Attended transfer is

implemented by a REFER method with Replaces in the Refer-To header.
Normally, call transfer is completed by tapping the transfer key. Blind transfer on hook and
attended transfer on hook features allow the IP phone to complete the transfer through
on-hook. Blind transfer on hook and attended transfer on hook features are not applicable to
CP960 IP phones.
When a user performs a semi-attended transfer, semi-attended transfer feature determines
whether to display the prompt "n New Missed Call(s)" ("n" indicates the number of the missed
calls) on the destination party's phone touch screen.
, and then tap All Lines.
Configuring Advanced Features
RFC 3515 and offer three
363