Yealink CP969 Administrator's Manual page 565

Variable Value
$remote
$display_local
$display_remote
$call_id
$callerID
$calledNumber
Procedure
Action URL can be configured using the following methods.
Central Provisioning
(Configuration File)
The SIP URI of the callee when the IP phone places a call.
The SIP URI of the caller when the IP phone receives an
incoming call.
The display name of the caller when the IP phone places a
call.
The display name of the callee when the IP phone receives
an incoming call.
The display name of the callee when the IP phone places a
call.
The display name of the caller when the IP phone receives
an incoming call.
The call-id of the active call.
The display name of the caller when the IP phone receives
an incoming call.
The phone number of the callee when the IP phone places
a call.
<y0000000000xx>.cfg
Configuring Advanced Features
Description
Configure action URL.
Parameters:
action_url.setup_completed
action_url.registered
action_url.unregistered
action_url.register_failed
action_url.off_hook
action_url.on_hook
action_url.incoming_call
action_url.outgoing_call
action_url.call_established
action_url.dnd_on
action_url.dnd_off
action_url.always_fwd_on
action_url.always_fwd_off
action_url.busy_fwd_on
action_url.busy_fwd_off
543