Transfer Mode Via Dsskey - Yealink CP969 Administrator's Manual

Administrator's Guide for SIP-T5 Series Smart Media Phones
None
To configure feature key synchronization via web user interface:
Click on Features->General Information.
1.
Select Enabled from the pull-down list of Feature Key Synchronization.
2.
Click Confirm to accept the change.
3.

Transfer Mode via Dsskey

Transfer mode via dsskey enables IP phones to handle the current call differently via the DSS key.
IP phones support three transfer modes: New Call, Blind Transfer and Attended Transfer. For
more information on Blind Transfer and Attended Transfer, refer to
The transfer mode via dsskey feature is available when the DSS key is assigned to the following
features:
Speed dial

Transfer

BLF/BLF List

For more information on how to configure the DSS Key, refer to
Key on page 775.
372
Parameter Permitted Values
Call Transfer on page 363.
Appendix D: Configuring DSS
Default