Configuring Pc Port Mode - Yealink CP969 Administrator's Manual

Administrator's Guide for SIP-T5 Series Smart Media Phones
Select the desired value from the pull-down list of PC Port Link.
3.
Click Confirm to accept the change.
4.
A dialog box pops up to prompt that settings will take effect after a reboot.
Click OK to reboot the phone.
5.

Configuring PC Port Mode

The PC port on the back of the IP phone is used to connect a PC. You can enable or disable the
PC port on the IP phones via web user interface or using configuration files. PC port is not
applicable to CP960 IP phones.
Procedure
PC port can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
44
<y0000000000xx>.cf
g
Configure the PC port.
Parameter:
static.network.pc_port.enable
Configure the PC port.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=network-pcport&q=load