Auto Answer - Yealink CP969 Administrator's Manual

Administrator's Guide for SIP-T5 Series Smart Media Phones
Settings->Features->Auto Redial->Redial Times
To configure auto redial via web user interface:
Click on Features->General Information.
1.
Select the desired value from the pull-down list of Auto Redial.
2.
Enter the waiting time in the Auto Redial Interval (1~300s) field.
3.
The default value is 10.
Enter the desired times in the Auto Redial Times (1~300) field.
4.
The default value is 10.
Click Confirm to accept the change.
5.
To configure auto redial via phone user interface:
Tap Settings->Features->Auto Redial.
1.
Tap the On radio box in the Auto Redial field.
2.
Enter the waiting time (in seconds) in the Redial Interval field.
3.
Enter the desired times in the Redial Times field.
4.
Tap to accept the change.
5.

Auto Answer

Auto answer allows IP phones to automatically answer an incoming call. IP phones will not
automatically answer the incoming call during a call even if auto answer is enabled. Auto answer
is configurable on a per-line basis. Auto-Answer delay defines a period of delay time before the
IP phone automatically answers incoming calls.
Auto Answer Tone
Auto answer tone allows the IP phone to play a tone when an incoming call is automatically
answered. You can customize the auto answer tone or select specialized tone sets (vary from
country to country) for your IP phone. For more information, refer to
292
Parameters Permitted Values
Tones on page 614.
Default