Removing The Shock Absorber - Husqvarna TX 125 Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.16

Removing the shock absorber

–
Check the headlight setting. (
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Remove the cable ties.
–
Remove screws
–
Remove screws
–
Remove the frame protectors on the left and right.
V00394-10
–
Remove screw
–
Remove fitting
Info
Raise the wheel slightly to be able to remove the screws more easily.
F00284-10
–
Press angle lever
–
Press linkage lever
F00285-10
–
Remove the cable ties.
–
Disconnect plug-in connector
S01342-10
–
Remove screws
–
Pull off foot brake cylinder from the push rod.
V00396-10
p. 93)

.

with the washers.

.

.

toward the rear.

downward.

.

.
p. 45)
52