Removing The Headlight Mask With The Headlight - Husqvarna TX 125 Owner's Manual

15 ELECTRICAL SYSTEM
15.5

Removing the headlight mask with the headlight

–
Take off protection caps
–
Remove faulty main fuse
Info
You can recognize a defective fuse by a burned-out fuse wire
A spare fuse
–
Install a new main fuse.
Fuse (58011109110) (
–
Check that the electrical equipment is functioning properly.
Tip
Insert a spare fuse so that it is available if needed.
–
Mount the protection caps.
–
Mount the starter relay onto the holder and route the cable.
S01346-10
Finishing work
–
Mount the seat. (
–
Install the air filter box cover. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
Main work
–
Detach brake line
–
Release rubber bands
V00417-10
(TE 250/300 EU/AU)
–
Detach plug-in connectors
light.
V00418-10
(TE US, All 125/150 models)
–
Detach plug-in connector
light.
V00419-10

.

.

is located in the starter relay.
p. 131)
p. 55)
p. 56)
 
and wiring harness

. Slide the headlight mask up and swing it forward.

and take off the headlight mask with the head-

and take off the headlight mask with the head-

.
90
.