17
TUNING THE ENGINE
2
0 0 2
3
0 0 3
4
0 0 0 4
(All 250/300 models)
–
V00428-11
–
–
5
0 0 5
B00056-11
–
E00440-10
–
–
–
Remove screws
.
Remove cap
, adjusting spring
insert
from the clutch cover.
Pull both springs off of the spring insert.
Mount the required auxiliary spring (
and position them together in the clutch cover.
Auxiliary spring with yellow marking (54637072300)
Auxiliary spring with green marking (54837072100)
Auxiliary spring with red marking (54837072000)
The recess in spring insert
Info
Screw
must not be turned as this would worsen the engine charac-
teristic.
Check the O-ring in the cap.
Position the cap.
Mount and tighten the screws.
Guideline
Screw, exhaust control cover
, auxiliary spring
p. 104)
and adjusting spring
engages in the angle lever.
M5
106
, and spring
6 Nm (4.4 lbf ft)