12
SERVICE WORK ON THE CHASSIS
12.19
Mounting the seat
12.20
Removing the air filter box cover
Main work
–
Remove screw
–
Pull seat back and lift it off.
F00296-10
Main work
–
Mount the front of the seat on the collar bushing of the fuel tank, lower the seat at
the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten screw
Guideline
Remaining screws, chassis
F00297-10
Finishing work
–
Install the air filter box cover. (
–
Pull off the air filter box cover sideways in areas
toward the front.
V00403-10
.
.
p. 56)
M6
10 Nm (7.4 lbf ft)
,
and
, and remove
55