Installing The Headlight Mask With The Headlight; Changing The Headlight Bulb - Husqvarna TX 125 Owner's Manual

15 ELECTRICAL SYSTEM
15.6

Installing the headlight mask with the headlight

15.7

Changing the headlight bulb

Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Main work
(TE 250/300 EU/AU)
–
Connect plug-in connectors
V00418-11
(TE US, All 125/150 models)
–
Connect plug-in connector
V00419-11
–
Position the headlight mask and secure it with rubber bands
The holding lugs engage.
V00420-10
–
Position brake line
F00342-10
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (

.

.
 and wiring harness 
p. 93)

.
in the brake line guide.
p. 90)
91