Checking The Free Travel Of The Foot Brake Lever; Adjusting The Basic Position Of The Foot Brake Lever - Husqvarna TX 125 Owner's Manual

13 BRAKE SYSTEM
13.9

Checking the free travel of the foot brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
13.10

Adjusting the basic position of the foot brake lever

Warning
Danger of accidents The brake system fails in the event of overheating.
If there is no free travel on the foot brake lever, pressure builds up in the brake system on the rear brake.
–
Set the free travel on the foot brake lever in accordance with the specification.
–
Add brake fluid up to level
Guideline

Level
reservoir rim)
Brake fluid DOT 4 (
–
Position cover
–
Mount and tighten screws
Info
Clean up overflowed or spilled brake fluid immediately with water.
V00415-10
–
Disconnect spring
–
Move the foot brake lever backwards and forwards between the end stop and the
foot brake cylinder piston bracket and check free travel
Guideline
Free travel of foot brake lever
» If the free travel does not meet specifications:
–
Adjust the basic position of the foot brake lever.
–
Reconnect spring
402026-10

.
(brake fluid level below
p. 135)
 
with membrane

.

.

.
5 mm (0.2 in)
.

.
3... 5 mm (0.12... 0.2 in)
( p. 76)
76