4 Replacement Procedures
4.15 Hinge (cover assembly side)
Removing the Hinge
The following describes the procedure for removing hinge (See Figure 4-32).
1. Remove the following screws securing the hinges (cover assembly side).
• M2.5×6.0
2. Turn up the insulator on the left hinge and remove the hinges from the cover
assembly.
Hinge
Figure 4-32
Installing the Hinge
The following describes the procedure for installing the hinge (See Figure 4-32).
1. Install the hinges to the cover assembly and secure them with the following screws.
• M2.5×6.0
2. Stick the insulator on the left hinge.
QOSMIO G10 Maintenance Manual (960-497)
PSP TIGHT screw
M2.5x6.0 PSP TIGHT
Removing the hinge (cover assembly side)
PSP TIGHT screw
4.15 Hinge (cover assembly side)
x2
Hinge (left side)
Insulator
x2
4-49