4 Replacement Procedures
4.23 CPU
Removing the CPU
The following describes the procedure for removing the CPU (See Figure 4-44 and 4-45).
1. Remove the following screws securing the heat sink holder.
• M2.0×4.0Z
NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse
order of the number marked on the holder.
2. Remove the heat sink holder and CPU heat sink.
M2.0x4.0Z BIND
QOSMIO G10 Maintenance Manual (960-497)
BIND screw
Figure 4-44
Removing the CPU heat sink
x3
Heat sink holder
CPU heat sink
4.23 CPU
4-65