Microphone; Removing The Microphone; Installing The Microphone - Toshiba QOSMIO G10 Maintenance Manual

Hide thumbs Also See for QOSMIO G10:

Table of Contents

4 Replacement Procedures

4.13.2 Microphone

The following describes the procedure for removing the microphone (See Figure 4-29).

1. Disconnect the mic cable from the connector CN6000 on the SD board.

2. Pull out the microphone from the mic hold guide.

The following describes the procedure for installing the microphone (See Figure 4-29).

1. Install the microphone to the mic hold guide.

2. Connect the mic cable to the connector CN6000 on the SD board.

QOSMIO G10 Maintenance Manual (960-497)

Mic hold guide

Figure 4-29 Removing the microphone

4.13 SD board / Microphone / MDC

Table of Contents