Toshiba QOSMIO G10 Maintenance Manual page 222

3 Tests and Diagnostics
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
remembered. If data does not appear on the display you are using after starting
in Standby or Hibernation, pressing Fn+F5.
Pressing Fn+F5 changes the display setting as follows in order: the internal
LCD, the external CRT, both the internal LCD and the external CRT and TV
display.
You cannot select TV display in HW Setup. To display on a TV screen, use
Fn+F5.
When an external CRT display, which does not support SVGA mode is connected
and "LCD+AnalogRGB" is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
(c) TV Type
This option allows you to select the type of TV.
NTSC (Japan)
NTSC (US)
PAL (S-Video)
525p (480p,D2)
750p (720p,D4)
1125i (1080i,D3)
525i (480i,D1)
PAL (SCART)
11. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
QOSMIO G10 Maintenance Manual (960-497)
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
TV in Japanese system
TV in the U.S. system
TV in Europe and China system
High Definition Television with 480 progressive scan
High Definition Television with 720 progressive scan
High Definition Television with 1080 interlace
High Definition Television with 480 interlace
TV in Europe system
Enables the touch pad. (Default)
Disables the touch pad.
3.31 SETUP
3-101