Lcd Harness - Toshiba QOSMIO G10 Maintenance Manual

4.28 LCD harness

4.28 LCD harness
Removing the LCD harness
The following describes the procedure for removing LCD harness (See Figure 4-56).
1. Remove the LCD cushion from the LCD support.
2. Remove the following screws securing the LCD support (display cover side) and
remove the LCD support.
• M2.5×6.0
3. Remove the following screw securing the LCD harness holder (display cover side)
and remove the LCD harness holder.
• M2.5×4.0B
M2.5x6.0 PSP TIGHT
M2.5x4.0B FLAT BIND
LCD harness holder
Figure 4-56
4-78
PSP TIGHT screw
FLAT BIND screw
LCD cushion
Removing the LCD harness holder (display cover side)
4 Replacement Procedures
x2
x1
M2.5x6.0 PSP TIGHT
LCD support
QOSMIO G10 Maintenance Manual (960-497)