Pc Card Slot - Toshiba QOSMIO G10 Maintenance Manual

4.26 PC card slot

4.26 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot (See Figure 4-51).
1. Remove the following screws securing the PC card slot.
• M2.0×8.0Z
• M2.0×3.0Z
2. Pull up the PC card slot straight and remove it from the connector CN2100 on the
system board.
PC card slot
M2.0x3.0C
SUPER THIN HEAD
Installing the PC card slot
The following describes the procedure for installing the PC card slot (See Figure 4-51).
1. Insert the terminal of the PC card slot to the connector CN2100 on the system board.
2. Secure the PC card slot with the following screws.
• M2.0×8.0Z
• M2.0×3.0Z
4-72
BIND screw
SUPER THIN HEAD screw
M2.0x8.0Z BIND
Figure 4-51 Removing the PC card slot
BIND screw
SUPER THIN HEAD screw
4 Replacement Procedures
x2
x2
CN2100
x2
x2
QOSMIO G10 Maintenance Manual (960-497)