4 Replacement Procedures
4.21 VGA fan
Removing the VGA fan
The following describes the procedure for removing the VGA fan (See Figure 4-42).
1. Remove the following screws securing the VGA fan.
• M2.5×4.0B
2. Remove the VGA fan.
Installing the VGA fan
The following describes the procedure for installing the VGA fan (See Figure 4-42).
1. Install the VGA fan to the base assembly.
2. Secure the VGA fan with the following screws.
• M2.5×4.0B
QOSMIO G10 Maintenance Manual (960-497)
FLAT BIND screw
VGA fan
Figure 4-42
Removing the VGA fan
FLAT BIND screw
4.21 VGA fan
x2
M2.5x4.0B FLAT BIND
x2
4-63