This kit provides for the installation of tubular stainless steel
handles on 19 mm overlay custom panels.
TOOLS AND MATERIALS REQUIRED
In addition to the custom door panels, you need:
• #2 Phillips screwdriver
• Drill and 7/32" bit
and 7/8" spade bit
• Safety glasses
PARTS LIST
2 Stainless tubular handles
8 Handle standoffs
10 Screws for handle standoffs
#10-32 x 1" pan head machine
screws (8 required, 2 extra)
10 Set screws (8 required, 2 extra)
Tubular Stainless Steel Handles
• Center punch
• Hammer
• Pencil
3/32" Allen wrench for set screws
10 Plastic spacers (8 required, 2 extra)
STEP 1 REMOVE DOOR HANDLES
• Open the refrigerator door to 90°. Remove
the 6 screws holding the handle to the door.
• Remove the 6 screws holding the handle side trim.
Retain all screws and trim. Discard the handle.
• Follow the same procedure to remove the freezer
handle and trim.
20