8- ELECTRIC RETRACT Continued
!
Roll the towel paper around
the landing gear at here before
glue, because if the CA glue
run down, the landing gear
unrotatable.
8C
Secure the wooden gear door mount with the
landing gear using CA glue
9- SERVO - CONTROL HORN
Plastic control horn
......2 set
CA
8C
Cut away only
the covering
8A
Slide the wheel and collar onto the wheel axle.
8B
Connect the electric retract with the radio to check
the position of the wheel when the electric retract
in retracted position. Ensure smooth non-binding
movement.
Cut the landing gear excess.
8A
Cut away only
the covering
Need help?
Do you have a question about the F6F HELLCAT and is the answer not in the manual?