Table of Contents
Advertisement
8.2 – On-screen menus
8.2.4.4
Date & Time
10056003;a1
Figure 8.8 Setup – Date & Time dialog box
The system time and date is set from within the Setup – Date & Time dialog box. The
format that the information is presented in depends on the settings made in the Local
Adaptions dialog box. For example, if the 12 hour (a.m./p.m.) format has been select-
ed, the time setting can be adjusted from 12 p.m. through 12 a.m. If the 24 hour format
is active 1 through 24 can be set. Use the up/down arrow buttons to move the high-
lighted bar through the selections, and the left/right arrow buttons to adjust values/set-
tings. Pressing the ENTER button will accept any changes made and then exit the
MENU mode, or press C to exit without making any changes to the current settings.
Label
Year
Month
Day
Hour
Minute
24
Explanation
1981--2038
1 through 12
1 through 31
12 a.m. through 12 p.m.
■
1 through 24 (format dependent)
■
00 through 59
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
Advertisement
Table of Contents
