Table of Contents
Advertisement
8.2 – On-screen menus
8.2.4.2.1
When IR is selected
10700003;a1
Figure 8.6 Setup – Symbology dialog box
Label
Data field
Data background
Status background
Focus indicator
Crosshair retic
22
Explanation
The Data field option affects the two lines of infor-
mation presented at the bottom of the display.
Three choices are available:
Normal (both lines are shown)
■
Reduced (only the bottom line is shown, i.e.
■
date, time, and digital azimuth/elevation)
None (both lines are disabled)
■
The Data background feature can be used to put
a solid background behind the lines of symbology,
making them more visible.
The Status background feature can be used to
put a solid background behind the status symbol-
ogy (Frozen, Autoscan, Near focus etc.), making
it more visible.
Focus indicators affects the presentation of the
analog focus indicator.
Three options are available:
On (the indicators are always shown)
■
Off (the indicators are disabled)
■
When changed (the indicator is only shown
■
during a change of focus).
The Crosshair retic selection controls the presen-
tation of the crosshair indicator.
Two options are available:
On (the indicator is always shown)
■
Off (the indicator is disabled)
■
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
Advertisement
Table of Contents
