Table of Contents
Advertisement
Label
NFOV brackets
8.2.4.2.2
When TV is selected
This is the same dialog box as when IR is selected.
8.2.4.3
Local adapt
10055903;a1
Figure 8.7 Setup – Local adaption dialog box
The Setup – Local adaption dialog box is used to adjust the format that system date,
time, and the language that the symbology is displayed in. Use the up/down arrow
buttons to move the highlight bar between the menu selections, and the left/right arrow
buttons to adjust values/settings. Pressing the ENTER button will accept any changes
made and then exit the MENU mode, or press C to exit without making any changes
to the current settings.
Label
Language
Date format
Time format
Publ. No. 1 557 544 Rev. a121 – ENGLISH (EN) – October 6, 2005
Explanation
The NFOV brackets selection controls the presen-
tation of the NFOV reticule that is displayed when
the system is in the WFOV (and is used to provide
an indication of the area viewed when the NFOV
is selected).
Two options are available:
On (the indicator is always shown)
■
Off (the indicator is disabled)
■
Explanation
English + optional languages
MM/DD/YY
■
DD/MM/YY
■
YY-MM-DD
■
HH:MM:SS (24 hour format)
■
HH.MM.SS (24 hour format)
■
HH:MM:SS PM (12 hour format)
■
8.2 – On-screen menus
23
Advertisement
Table of Contents
