Table of Contents
Advertisement
[5.5.4.4.2 — Prompt comment?]
Prompt comment ?
5.5.4.4.2
If this parameter is selected as Voice the Voice comment dialog box (see "Voice
comment..." on page 26) will show up on the screen every time an image storage
operation is made. This function gives the user a chance to add a voice comment
to the image before storing the image on disk. If the parameter is selected as Text,
the text comment dialog box will appear when the operator saves an image. If
Continuous mode is selected, as in Image storage above, this function is ignored.
5.5.4.4.3
Image naming
If Use date is selected, the automatic generation of image names will be based on
current date. If Use dir is selected, the automatic generation of image names will
be based on the first five characters of the current inspection directory. See "Nam-
ing files and directories" on page 23.
5.5.4.4.4
Image file type
If IMG only is selected, this format will apply to all the images that are saved onto
the PC-card. If BMP only is selected, all images will be saved in the bitmap for-
mat. The operator can also select IMG & BMP which saves images in both for-
mats. If any IR analysis is to be done to an image after the recording, it has to be
saved as IMG only or IMG & BMP.
5.5.4.4.5
BMP file content
If BMP only or IMG & BMP is selected above, the operator can choose if the
saved images should contain only the infrared data (IR only) or data and graphics
(IR & graphics). If BMP only is selected, no later analysis can be made to an
image.
5.5.4.5
Date & Time...
By pressing the ↵ button when Date & Time... is highlighted in the Setup menu,
the Setup – Date & Time dialog box is displayed on the screen. By moving the joy-
stick up/down the different dialog box items are selected, i.e. Year, Month, Day,
Hour and Minute. By moving the joystick left/right the item parameters will be
changed. When the ↵ button is pressed the parameters are stored and the dialog
box is removed. If the clear button C is pressed the dialog box is removed without
storing any changed parameters.
5.5.4.6
System Info...
By pressing the ↵ button when System Info... is highlighted in the Setup menu,
the first System information panel is displayed on the screen. By moving the joy-
40
ThermaCAM™ PM575/595 Operator's Manual
Hide quick links:
Advertisement
Table of Contents
