Cleaning The Bobbin Case; Refitting The Bobbin Case - ELNA 3003 Instruction Manual

VI MAINTENANCE
CLEANING THE BOBBIN CASE
Remove the plug from the outlet socket.
This machine does not need oiling However,
(
the area around the bobbin and hook must be
ý,)
cleaned each time the machine has been
used extensively. The casing may be cleaned
--
)
with a soft cloth and pure soap.
Remove the needle before cleaning the
machine.
To remove the hook cover push the button on
Take out the bobbin. Insert the bobbin
the side to the right
Clean the whole area with the lint brush. Refit the hook cover.
CLEANING THE HOOK
REFITTING THE BOBBIN CASE
Remove the plug from the outlet socket.
Remove the bobbin and the bobbin case
Clean the feed dog, the hook and the bobbin When refitring the bobbin case, make sure
Raise the needle to its highest position, case with the lint brush
that the front notch holds the bobbin case well
Remove the presser foot and the needle. With
in place to prevent it from turning
the screwdriver, remove the screw at the left
of the needle plate.
Remove the needle plate
ao