Corded Buttonhole .A23; Zipper Insertion - ELNA 3003 Instruction Manual

Hide thumbs Also See for 3003:
Table of Contents

Advertisement

CORDED
BUTTONHOLE
With the buttonhole foot raised, hook the
Sew the buttonhole according the the instruc
Pull the left end of the piping cord to make
cord on the cord spur at the back of the foot
tions given on pages A-20 and A-2 I
disappear the loop at the tear
Lead the two ends of the cord towards you
Remove the garment from the machine and
Cut flush the cord ends.
R
and under the foot, with the tails showing in
secure the threads.
front.
" Adjust the stitch width to the thickness of the
Pass the ends into the forks at the front of the
cord used.
foot and hold them tightly.
" To open the buttonhole and start the next
Lower the needle into the fabric at the starling
one, refer to the instructions on page A2 1.
point, then lower the foot.
ZIPPER INSERTION
15-4
A
3 -6
The zipper foot E can be attached either
on
Preparing the fabric:
Baste the opening and iron Remove the bast
the left or on the right, depending on the way
Prepare an open searm and sew both fabrics
ing threads.
the zipper is fixed on the garment
together, right side against right side
to
the
height oF the opening.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

30073005

Table of Contents