Table of Contents
Advertisement
WINDING THE BOBBIN (Models 3005 + 3007)
INSERTING THE BOBBIN
Draw the thread from the spool,
Place the bobbin in the bobbin case with the
Keep slowly pulling the thread unti it sides
read running counter-cl ockwise.
into the notch 'B'.
2. Engage the thread into the thread guide.
3. Guide the thread around the bobbir wind
t
er thread guide.
4.
Pass
the thread through the hole
in the
prýorbhin.
5. Place thre bobbin or the bobbion wrrrder
6 Hoin tihoendot the thriead and depress7
and push it to the rghi
the hoot control for a couole of turns. Cut
"
the
thread
Depress the foot control. The
A
_
botbi
woi
stop auiomatically when
it
is
full.H
+
7. Pus the brobbn winder back to the le;7
take art the buobbin and cut the thread
6Guae
the thread into the notch
'A on the
Pul out about 1Scm(6")of Thread and refit
front. Hold the bobbin with your right hand
the hook cover plate
~and
pull the thread to tire left and thfough the
tension spring blades.
S.)
al
Hide quick links:
Advertisement
Table of Contents
