Fabrics, Threads And Needles; Placing The Thread Spool; A Dditional Spool Pin .A; Removing The Bobbin - ELNA 3003 Instruction Manual

FABRICS, THREADS AND NEEDLES
PLACING THE THREAD SPOOL ADDITIONAL SPOOL PIN
Fabics Threads
Needles
Light Crepe de Chine, Voile, lawn, fine Silk 10/70 or ,7
weight Georgette,
11/75 or
Orgondie, Trico, fine Cotton or
Mesh, Percale Synthetic Thread 12/80
Medium Linen, Cotton Piqu6 Medium Weight
12/75 or
,-
weight
Woollens, Double Knits Cotton or 12/80 or
Percale Synthetic Thread
14/90
Hear/
Denin, Tweed, Gabardine, Sewing Silk, 12/80 or #
weight Coatng, Drapery and
Heavier Cotton or 14/90
Upholstery Fabrics
Synthetic Thread
Lift up the spool pin as shown. Place the The additional spool pin is used for
For best results, use needles and threads that are adapted to the fabrics. For finer fabrics, fine
matching spool holder on the spool and lower sewing with 2 needles or to wind the bobbin
needles and threads, for heavier fabrics, stronger needles and threads the spool pin
without
*
The small spool holder is used with narrow unthreading the machine.
Use the same thread For needle and bobbin
thread spools.
Place the felt on the spool pin
When sewing stretch, very fine fabrics and synthelics, use a needle with blue shank. This needle
prevents skipped stitches.
REMOVING THE BOBBIN
When sewing very fine fabrics, reinforce the reverse side with fusible intledining or very fine Push the hook cover plate button to release
paper that will be torn off afler the cover plate.
tift out the bobbin.