Pattern Selection; Stitch Width; Decentering The Needle - ELNA 3003 Instruction Manual

PATTERN SELECTION
STITCH WIDTH STITCH LENGTH
DECENTERING THE NEEDLE
C3D
0-1-2-3-4-5-6- o =1 2
3
4 4
0"1*2
3
4-5 6 " 0 -~1 2 3 - 4
o
0
234-5
6.
'
Select a pattern by turning the stitch selector
The higher the number, the wider the srich.
The higher the number, the longer the stitch The straight stitch and the triple seam may be
The red signal confirms the chosen pattern.
This machine can sew stitches of a maximum For a fine fabric, a stitch length of 1,5 to 2,5
decenered to the left by using the stitch width
width of 6.5 mm (1/4)
is preferable slide
N.B. The needle must be in the upper position
For a thicker fabric a stitch ength of 2 5 to
when you turn the stitch selector
*
For adjusting
the
stitch width, the needle 4 0 is indicated
must be in the upper position, i.e out of the
fabric
N.B 1he stitch length is automatc and cannot
be modified as from the triple seam onward,