MANUAL BUTTONHOLE
1'-5
*Butnoe
eo
utn with a diameter of more than 2.5 cm
(3003
+
3005).
Turn the balance wheel towards you or
Pull down the buttonhole lever completely.
]Ihvtobe swn manually.
13007) depress the needle up/down key to raise the needle to
tower the needle into the fabric at the starting point of the
its highest position. Raise the presser foot.
buttonhole and lower the foot,
Turn the selector dial to "BH" for the buttonhole.
*If
the indicator light is already on "BH" reset the machine
according to the instructions on page A-21.
Attach the F foot.
Sew the first oarlock and the left row to the desired length.
Pull the buttonhole lever towards you.
Sew the second bartack and the right raw. Stop when you
reach the first bartack.
*To
open the buttonhole and start the next one, refer to the
_________________________________________
instructions on page A-2
1