Iii Basic Sewing; Straight Stitch; Sewing An Angle; Straight Stitching On Heavy Fabrics - ELNA 3003 Instruction Manual

III BASIC SEWING
STRAIGHT STITCH
1.5
-
4
...
7
Rose the presser foot and place the fabric
To secure the ends of the seams, press the
The thread cutter cuts the threads to the
next to the guide line on the needle plate,
reverse stitch button and sew a few stitches,
proper length for starting the next seam,
__mA
Smooth the threads to the left and lower the
Raise the presser foot and
eemove
the fabric
presser foot Depress the foot control
pulling the threads to the rear,
Gently guide the fabric along the guide line
The needle must be in its highest position
when removing the fabric.
SEWING AN ANGLE
STRAIGHT STITCHING ON
Slop the machine.,
HEAVY FABRICS
13003 + 3005) Turn the balance wheele owertheneedleintothefabricatthestarting,
towards you to bring the needle down into the
-
point Press the small black button on foot A
fabric,
with your left hand thus giving extra weight to
(3007): Lower the needle into
the fabric
by
t the
presser foot,
pressing the needle up/down key
lower the presser foot with your right hand,
Raise the presser foot.
maintaining the pressure on the black button
Pivot
the fabric around the needle To change
,with
your left hand. Release the block button
the sewing direction Lower the presser foot
and start sewing.
and continue sewing