Taking Care Of Your Machine; Cleaning The Bobbin Case And Hook - ELNA 2000 Series Manual

SECTION VI

Taking Care of Your Machine

The area around the bobbin, hook and feed dog
must be cleaned each time the machine has been
used a lot.
Clean the outside of the machine with a soft cloth
and pure soap.

Cleaning the Bobbin Case and Hook

Loose threads and dust may cause puckered
stitches and thread breakage during stitching. Check
for lint buildup after each project is completed.
B
B
Unplug the machine before cleaning.
Turn the flywheel until the needle is raised and re-
move the needle.
C
A
Remove the extension table and open the bobbin
cover. Pull out the latch A and remove bobbin case
and bobbin.
Open the hook race ring holders B and remove the
hook race ring C.
Remove the hook D. Clean the hook race E with a
brush or a soft cloth. (You may also use a small
vacuum cleaner.)
To assemble the hook race, hold the hook D by the
center pin and carefully put it back into the hook race
E. Attach the hook race ring C making sure the bot-
D
tom pin fits into the notch. Turn the holders B back
into position to lock the hook race ring. Insert the
bobbin case. Oil the hook slightly.
E
C
38